B, Key Drawings


Model 401, 4-Track Yard
(Largescale)

*m*e*n*u | 401
* Model 401 *
(aka 1653/1654)

Video #644
A Introduction
B Key Drawings
C All Const Dwg
D All Oper Dwgs
E About The PDF's

* PDF Directory

  Latest design is
  Model 402

Special 2-piece track unit wiring
  (9L09)

-
*G *m*e*n*u-09i | Plans-IAC
* G Plans *

1 AutoControls Home

6 Plans Index
7 Museum
  (Previous Plans )
8 Special Parts
10 List of Videos

~~~~~~

 1-trk (Mdl 106)
 2=trk (Mdl 206)
 4-trk (Mdl 402)
 (9L13)

 

List of Drawings, shown BELOW on this page: 

--11" x 17" Construction Sheets--

Drawing #35 -Track Unit

Drawing #38 - Track Wiring
Drawing #39 - Template For Helper Control Unit
Drawing #41 - Parts List & Costs For Helper Control Unit
Drawing #42 - Parts List & Costs For Track Unit
--11" x 17" Interface and Operating Sheets--
Drawing #46 - Signal Light
Drawing #49 - Schematic
Drawing #50 - Sequencing Schematic
 

What This Section Shows You

This section shows you the "KEY" (most important) drawings for Zellner Yard, as supplied in drawing set Item 9.

The next 2 sections show you ALL the drawings that have been developed for this system.

Other Comments

You use the #1651 Main Control (Sheet 09 as shown below, part of Drawing Set Item 4) from the Two-Track Block Drawings, as the Main Control Unit for Zellner Yard.

May 2006 Note - When To Use The Model 402 Template

Use the Model 402 template (added May 2006) described in Section C1, if you want to build a 4-track control unit from "scratch", rather than expanding a 2-track unit.

The Model 402 Yard uses most of the drawings from the earlier 1654 design (Sections D1 thru D4), but there are 3 new drawings created for the one-piece control unit: Cover Sheet, template, and parts list.

Drawing #35 - Track Unit


Photo of #1654 Track Unit).

 

Drawing # 38 - Track Wiring

 

Drawing #39 - Template For Helper Control Unit


Photo of #1653 Helper Control Unit).
The template drawing Sheet 39 is colored, and plastic-laminated, so you can cut it out,
glue it to a wood base, and attach all the parts and wires.

Drawing #41 - Parts List For Helper Control Unit

 

Drawing #42 - Parts List For Track Unit

 

Drawing #46 - Signal Light

 

Drawing #49 - Schematic

 

Drawing #50 - Sequencing Schematic


This page created 4/97, modified 5/5/2006 by (bottom include)
James R. Ingram , Williamsport Pa, 570-322-7597